KRAUS MOTO Raptor 1-1/2 in. Pull Back Plate - Black Anodized - Road Glide '00-'25

Raptor 1-1/2 in. Pull Back Plate - Black Anodized - Road Glide '00-'25.

The Raptor Pull Back Plate is for Road Glides. Bolt it to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5" so that you can mount any standard risers and they will clear the Gauges on 2014 & Up Road Glides.

• The Raptor Plate relocates the bar mounts 1.5" closer to the rider.
• The Raptor Plate adds 2.5" of total height* to the bar/riser.
• *Total height may vary slightly depending on the bushing and/or bar type.
• The Raptor Plate improves bar position when using Motocross style bars.
• Please be aware that you will lose the Accessory and Fork Lock positions of the stock Key Switch.
• Will not work with CVO AND may not work on custom models (call to confirm fitment). On CVO models the stock Steering Lock will interfere and cannot be used.
• We recommend running Kraus Isolated Risers with this setup for Vibration Damping.
  

Fitment

• 2000 and up Road King, Road Glide models.
• Not Compatible with '21 and up CVO Models - Call for fitment
• Holes will need to be cut in the bagger Nacelle for the risers to protrude or use our Billet Gauge Mount (sold separately) and get rid of that stock plastic Nacelle altogether. Includes instructions and template for the Raptor Plate Nacelle / Gauge Panel modification.
• Use our Raptor Plate Drill Guide tool part# ST-PB-102 (sold separately) to get the pilot holes perfectly positioned in your Nacelle.
• 2024+ Models will contact factory nacelle. Can be installed with Kraus Trees however.